What Is an Automatic Screw Feeder?

As the name suggests, an automatic screw feeder can help replace humans in places where screw tightening is required. This is true about automatic assembly units like batteries, circuit boards, printers, mobile phones, lanterns, lamps, motors and different car components, to name a few. This type of device can help improve the efficiency of production significantly. Let’s find out more about these units.

The Handheld Unit

With an automatic screw feeder, you don’t need to hold screws in one hand the electronic locking screw in the other. All you need to do is raise the screwdriver and then target the hole where the screw will go.

Once the hold has been identified, the screw feeder will transfer the screw to your screwdriver. This process continues to repeat.

Features of a Handheld Unit

If you transfer and lock screws using an automatic screw feeder, you won’t need to fetch screws manually. In this case, the screw locking speed will be 40 to 60 pieces per minute. At this high speed, it’s possible to save a lot of money and boost production efficiency.

Once a screw is locked in place, then it sends another screw right away. Therefore, there is no time required to fetch another screw. All you need to do is aim the hole and put a little pressure, and the screw will be locked.

It’s possible to use it with wind batches and an original screwdriver. The torque adjustment is the same, which is why it is possible to save costs. Besides, the electric batch is portable and may help prevent employees from getting tired.

You can use it as a single unit or as part of an assembly line. This can help make screw locking much more efficient.

You can use it to automate an assembly line in the electronic industry. For instance, it can be used for communication equipment, toys, plastic toys, keyboards, hard drives, and mobile phones.

The Fully Automatic Screw Feeder

An automatic screw feeder comes with additional features like automatic control, a workbench, and an assembly line. So, using these automatic machines can help save labor costs and boost the efficiency of production and assembly units.

This automatic unit is of two types: a three-coordinate fully automatic one and a multi-axis fully automatic one.

The three-coordinate one features different movement strokes at the Y and Z-axis. This is made to order based on the clients’ demand. Generally, the feeding methods refer to pneumatic feeding and suction.

Also, the choice of the methods is based on the specifications of the screw. Based on the requirements, you can follow the pneumatic feeding method.

An automatic screw feeder machine is known as a special machine. For instance, it is a special unit that can help lock products. Generally, the feeding method includes suction, pneumatic feeding, and manual feeding. However, the choice of the right method is based on the screw specs.

In short, this was an introduction to an automatic screw feeder machine. Hope this helps.